![]() The IP address should match the IP address on the Spark’s display. Look for a device called Universal Global Scientific Industrial. This app can scan your local network for devices. I recommend the app Fing (Android / iOS). To do this, you will have to find the MAC address of the Spark. When you want your BrewPi Spark to always get the same IP address so that the script can find it, you should configure a static DHCP lease in your router. Edit the file /home/brewpi/settings/config.cfg and add the following line (assuming the IP address found in step 1 was 192.168.1.96): Modify settings/config.cfg to use the TCP socket instead of a serial port. The IP address is shown on the display when you are not in test mode. ![]() ![]() To connect over WiFi, you will have to do 2 things:įigure out the IP address of the controller. Been through som particle runs, light is now breathing green.Ĭonfigure the script to use WiFi to connect to the controllerīy default, the BrewPi script looks for compatible Serial devices.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |